Arduino Uno R3 ATmega328P Board - Compatible

Though there were many boards before the Arduino Uno, this is a de-facto standard board among all the arduino boards. The board we sell here is a clone of Original Arduino Uno.
Uno ATmega328P Board should be your first board to get started with electronics and coding. If this is your first experience tinkering with the platform, this is the most robust board you can start playing with. UNO boards also have been the most used and documented board in the open source community.
Uno ATmega328P Board is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller. To begin with, simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Since the board has a replaceable chip, if you really succeed in burning the chip, you can easily remove it and replace it with a new one.

Specifications

• Based on ATMega328P
• Input Voltage : 2.7-5.5 V
• Operating Voltage : 5V
• DC Current per I/O Pin : 20mA
• DC Current for 3.3v Pin : 50mA
• Flash Memory : 32 KB, 0.5KB used by Bootloader
• SRAM : 2 KB
• EEPROM : 1 KB
• Clock Speed : 16 MHz
• Analog Pins : 6
• Digital Pins : 14 with 6 PWM pins
• Weight : 37g
• Dimensions : 5 x 5 x 0.08cm

Shipping List

• Uno ATmega328P Board - Compatible with Arduino x 1

Good to know

• We are clear on what we sell. This is an open source Ardunio Uno clone. Since Arduino is Open Source, anyone can create compatible versions of the board and use the freely available development environment and many associated resources