Sensor Modules as the name says, helps you sense your environment, well, in an electronic way. The sensor modules are designed to sense and measure light, pressure, temperature, motion, current, humidity, and more. We extensively research and include a whole lot of sensor modules for your electronic and robotic requirements. Most of them are as simple as Plug-and-Play.
Brand: VEEROBOTModel: SEN-SNS-CNTP-1129
This is a basic RFID tag used for presence sensing, Aceess Control, Contactless transmission of data and supplies energy with no battery needed etc. Operating frequency is 125KHz and Data transfer speed is 106 kbit/s. These tags come with a unique 32-bit ID and are not re-programmable. Card is blan..
Rs29.00
Brand: VEEROBOTModel: SEN-SNS-CNTP-1128
This is 125K RFID Tag which uses RFID technology for sensing and identifying tagged objects (and people) for access control, automation, and a whole range of different applications.
Operating on a frequency of 125kHz, these tokens are all pre-programmed with unique ID numbers written on the back o..
Rs29.00
Brand: VEEROBOTModel: CMP-ELC-LEDS-262
This is the 16 LED RGB Ring where the outer diameter of the board is equipped with 5050 WS2812 RGB LEDs. The WS2812s are addressable LEDs with built in driver chip. Each LED has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5V.
Every rin..
Rs249.00
-27 %
Brand: VEEROBOTModel: KIT-RCK-SNKT-50
VEEROBOT 37 in 1 Sensor Kit for the Arduino system contains 37 individual modules which can be used to create many interesting experiments using the Arduino, AVR microcontrollers, PIC microcontrollers, Raspberry Pi etc. All of the modules packed in an organized box. A great package for Arduino exper..
Rs1,100.00 Rs1,499.00
Brand: VEEROBOTModel: SEN-SNS-SNDS-229
This is a simple Active Buzzer module which consists of an active piezoelectric buzzer and generates a sound of aproximately 2.5kHz when signal is high. Typical uses of buzzers include alarm devices, timers, and audio signal indicators.
Specifications
0.1" breadboard friendly pins
Operating Vo..
Rs49.00
Out Of Stock
Brand: VEEROBOTModel: SEN-SNS-ACCL-104
ADXL335 is a Breakout board based based on 3 axis ADXL335 IC from Analog Devices. The Accelerometer Module require no external devices and works directly on 5V power supply. This means you can connect it directly to your Arduino without an external regulator or a logic level converter. The output is..
Rs299.00
Out Of Stock
Brand: VEEROBOTModel: SEN-SNS-ACCL-1111
This ADXL345 module is low power consumption module with a 3-axis accelerometer. The module communicates via I2C or SPI communication to a MCU with user selectable sensitivity, and 10-13 bit resolution. The ADXL345 is well suited to measure the static acceleration of gravity in tilt-sensing applicat..
Rs129.00
Brand: VEEROBOTModel: SEN-SNS-LNRS-71
This is a dual axis high quality JoyStick Module and can be used to sense movements in 2 directions(axes). It also has a built-in switch that can be activated by pressing the joystick. Directional movements are simply two potentiometers - one for each axis and each pot has a 10k resistor across.
Wi..
Rs85.00
Out Of Stock
Brand: VEEROBOTModel: CMP-SNR-CNTP-431
The Broadcom APDS-9960 is a digital RGB, ambient light, proximity and gesture sensor device in a single 8-pin package. The device has an I2C compatible interface providing red, green, blue, clear (RGBC), proximity and gesture sensing with IR LED. The RGB and ambient light sensing feature detects lig..
Rs315.00
Brand: VEEROBOTModel: SEN-SNS-PRSN-225
This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Since pressure changes with altitude, the sensor can also be used as an altimeter. BMP180 is soldered onto a PCB with a 3.3V regulator, and pull-up resistors on the I2C pins. Thi..
Rs125.00
Brand: VEEROBOTModel: SEN-SNS-CNTP-1127
Digital Capacitive Touch Switch Module is based on TTP223B. Normally, it outputs low and keeps at low power state. When a touch is sensed on the circular marked region, it outputs high and switch to the quick response state. When not being touched for 12 seconds, it switches to low power state again..
Rs49.00
Brand: VEEROBOTModel: SEN-SNS-SNDS-110
Sound detection sensor module for arduino detects whether sound has exceeded a threshold value. Sound is detected via microphone and fed into an LM393 op amp. The sound level set point is adjusted via an on board potentiometer. When the sound level exceeds the set point, an LED on the module is illu..
Rs99.00