- Stock: Out Of Stock
- Model: MLR-MRC-MRFC-1590
- Weight: 220.00g
- Dimensions: 10.00cm x 8.00cm x 6.00cm
- SKU: VEE01590
- MPN: MLR-MRC-MRFC-1590
- Location: KA, India
This offer ends in:
More from this brand
DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS supports nine multi-rotor configurations. This Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system.
The MC (main controller) houses the flight computer and is at the heart of the flight control system. The PMU (power management unit) regulates how much power is sent to each of the four, six, or eight rotors. Lastly, the GPUs receiver/compass combo enables a number of features, including Intelligent Orientation Control (IOC) and the Go Home failsafe.
CAN-Bus ports on the MC allows the Naza-M to interface with a number of DJI accessories, including the Ground Station System, the iOSD Module, or a gimbal control unit (GCU).
Features
- All-In-One Compact Multi-Rotor Autopilot System
- New Assistant Software for Smartphones
- Supported Multi-rotors Quad-rotor: I4, X4
- Hex-rotor: I6, X6, IY6, Y6
- Octo-rotor I8, V8, X8
- Free Ground Station
- Take-Off Assistance
- Multiple Flight Control Modes and Intelligent Switching
- GPS Module Available for Accurate Position Stabilization
- Intelligent Orientation Control (IOC)
- Supports General, PPM, and S-Bus Receivers
- Arm/Disarm Modes for Safe Motor Starting
- 2-Axis Gimbal Stabilization
- Two Levels of Low Voltage Warnings and Protection
- Single Motor Failure Protection
- Supported ESC Output 400 Hz refresh frequency
- Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
- Supports Remote Gain Adjustment from the Transmitter
- Enhanced Failsafe Features, Including Auto Return-to-Home
- Compatible with DJI Video Downlink, iOSD, Ground Station, ZH4-3D/H3-3D Gimbals, and Future Products
- Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems
Performance
- Hovering Accuracy (GPS Mode) Vertical: 2.6 / 0.8 m
- Horizontal: 8.2 / 2.5 m
- Max Angular Speed 200/s
- Max Tilt Angle 35
- Ascent/Descent Ascent: 19.7 ft/s / 6 m/s
- Descent: 14.8 ft/s / 4.5 m/s
Specifications
- 1 x DJI Naza Main Controller Unit
- 1 x DJI Remote LED module for Coding and Interfacing with PC
- 1 x DJI Power Module
- 1 x DJI USB to MicroUSB Cable (18 inches)
- 1 x GPS Module
- 1 x GPS Module Stand
- 8 x Servo Cables (5 Inches Each)
- 1 x Set of Precise Double sided tape
10 Days Warranty
This item is covered with a standard warranty of 10 days from the time of delivery against any manufacturing defects only. Reimbursement or replacement will be done against manufacturing defects. All replacement must include all accessories, modules and anything else that was originally shipped along with the product. Please check our Refund & Cancellation policy and our Terms & Conditions for more details. To check if this the item is covered under any other Warranty period, please check "Extended Warranty" Tab (if available).
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
