Brand: VEEROBOTModel: CMP-ELC-LEDS-262
This is the 16 LED RGB Ring where the outer diameter of the board is equipped with 5050 WS2812 RGB LEDs. The WS2812s are addressable LEDs with built in driver chip. Each LED has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5V.
Every rin..
Rs249.00
Out Of Stock
Brand: VEEROBOTModel: CMP-SNR-CNTP-431
The Broadcom APDS-9960 is a digital RGB, ambient light, proximity and gesture sensor device in a single 8-pin package. The device has an I2C compatible interface providing red, green, blue, clear (RGBC), proximity and gesture sensing with IR LED. The RGB and ambient light sensing feature detects lig..
Rs315.00
Brand: VEEROBOTModel: SEN-SNS-IRLS-108
PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. They ar..
Rs99.00
Brand: VEEROBOTModel: SEN-SNS-CNTP-55
Infrared Flame sensor module module detects infrared light source within 760nm~1100nm and useful for detecting infrared light and flame (which also generates light in that wavelength). The module has a large detection range and can detect flame at a distance of 80cm. Greater the flame, farther the t..
Rs99.00
Brand: VEEROBOTModel: SEN-SNS-IRLS-121
Infrared (IR) Obstacle Avoidance Sensor Module has a pair of IR transmitter and IR receiver LED's. The transmitter LED sends out IR light and looks for reflected IR light to detect presence of any obstacles in front of the sensor module. The module has on board potentiometer that lets user adjust de..
Rs49.00
Brand: VEEROBOTModel: SEN-SNS-CNTP-226
Infrared IR Sensor Receiver Module for Arduino has an onboard TSOP1838(or compatible) infrared module. This is widely used in stereo, TV, video machine, disc machine, set-top boxes, digital photo frame; car stereo, remote control toys, satellite receivers, hard disk player, air conditioner, heater; ..
Rs199.00
-20 %Out Of Stock
Brand: VEEROBOTModel: SEN-SNS-IRLS-227
Laser Diode Module is a breadboard friendly, low cost 5mW 650nm 5V Red laser module operating at 5V. The laser head is composed of a light-emitting tube, condenser lens and adjustable copper sleeve. The focal length of the lens is adjusted and glued and the module can work directly after connecting ..
Rs99.00
Out Of Stock
Brand: VEEROBOTModel: SEN-SNS-IRLS-233
The laser proximity sensor is used for detecting objects, by passing a laser light on the object and detecting the reflected laser. The module will detect, very small sized objects too within the detection range. This is because the laser light ray is focused and almost have no divergence over small..
Rs649.00
Brand: VEEROBOTModel: SEN-SNS-IRLS-1106
Light Sensitive Module or Photosensitive resistance module is most sensitive to ambient light. The Module is commonly used to detect ambient light. This can be directly connected with any microcontrollers or to trigger a relay module. Output is pulled to logic LOW (on DO pin) if the light intensity ..
Rs99.00
Brand: VEEROBOTModel: SEN-SNS-IRLS-1108
To make the Magic Light Cup Module (KY-027) work, you need a set of two boards where each one has a led and a mercury tilt switch. Using PWM to drive the LEDs on each module you can achieve the effect of light being ""magically"" transferred from one module to the other when tilting them. Tilting th..
Rs69.00
Brand: VEEROBOTModel: SEN-SNS-IRLS-1116
RGB 3 Color LED Module - KY-016 is a full color 5mm RGB LED module, different colors can be obtained by mixing the three primary colors.
Each of the RGB pins can be individually connected to a microcontroller GPIO pin. Note that you do not need to use limiting resistors since they are already inclu..
Rs99.00