ADXL335 3-axis Analog Output Accelerometer Module

ADXL335 is a Breakout board based based on 3 axis ADXL335 IC from Analog Devices. The Accelerometer Module require no external devices and works directly on 5V power supply. This means you can connect it directly to your Arduino without an external regulator or a logic level converter. The output is analog and can be directly interfaced with your microcontroller analog input pins without any external components.
This module can be used to sense motion or tilt in 3 axis with extremely low noise and power consumption at only 320uA. The sensor has a full sensing range of +/-3g. By measuring the echo pulse width, the distance to target can easily be calculated.
There are numerous applications for an accelerometer like GPS navigation systems, FPV, RC and Robots systems, Impact recognition and logging, Intelligent power saving for handheld devices, Gaming and virtual reality input devices, Motion-activated functions, Vibration monitoring and compensation, 6D-orientation detection, Free-fall detection etc.

Specifications

• 0.1"" breadboard friendly pins
• Operating Voltage : 3.6v-5v
• Operating Current : 350uA (typical)
• Excellent temperature stability
• On board regulator
• Free fall and double tap detection
• 3 analog outputs for direct interface
• Dimensions (Approx) : 21x16mm

Shipping List

• ADXL335 3-axis Analog Output Accelerometer Module x 1