NRF24L01 2.4GHz Wireless Transceiver Module

NRF24L01 2.4GHz Wireless Transceiver Module is a great solution for wireless control capable of up to 2mbit communication with a range upto 50 feet indoors without extra antenna boost. The module has an built-in antenna and the nRF24L01 chip is a 2.4GHz transceiver with embedded baseband protocol engine, designed for ultra low power wireless applications.
The nRF24L01 is designed for operation in the world wide ISM frequency band at 2.400 - 2.4835GHz. Only a microcontroller and very few external passive components are needed to design a radio system with the nRF24L01 module which is configured and operated through a Serial Peripheral Interface(SPI) which can access the register map. The register map contains all configuration registers in the nRF24L01 and is accessible in all operation modes of the chip.

Features

• Built in nRF24L01+ transceiver IC
• Data rate up to 2Mbps
• Auto Acknowledge
• Auto Re-transmit
• Multiceiver-6 Data Pipes
• Max Range: 50ft (indoors)
• NRF24L01 SPI interface: hardware SPI port, MCU I/O ports
• Internal FIFO compatible with a variety of microprocessor interface
• Low application cost: NRF24L01 integrated part of all high-speed signal processing related to RF protocol
• High Data Rate: Can be set between 1Mbps to 2Mbps
• 125 channels, multi-point communication and frequency hopping to meet the communication needs
• Transmit power is 6dBm, the current is 9.0mA and accepted mode current is 12.3mA
• NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz
• Integrated Frequency generator, enhanced type, SchockBurstTM, mode controller, power amplifier, crystal amplifier, modulator, demodulator

Specifications

• 0.1"" breadboard friendly pins - 2x2.54 headers
• Operating Voltage : 1.9-3.6v
• Operating Current : 9mA at 6dBm transmission
• Data rate up to 2Mbps
• Auto Acknowledge and Auto Re-transmit
• Multiceiver-6 Data Pipes
• Max Range: 50ft (indoor)
• 125 channels, multi-point communication and frequency hopping
• Dimensions (Approx) : 29x15.2mm

Shipping List

• NRF24L01 2.4GHz Wireless Transceiver Module x 1

Good to Know

• The embedded baseband protocol engine (Enhanced ShockBurst) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Internal FIFOs ensure a smooth data flow between the radio front end and the system's MCU. Enhanced ShockBurst reduces system cost by handling all the high-speed link layer operations. The radio front end uses GFSK modulation. It has user configurable parameters like frequency channel, output power and air data rate