Brand: VEEROBOTModel: TLS-SLD-SLDR-1489
The main purpose of the soldering tweezers is to melt solder in the correct place; Components, especially SMD components are usually moved by simple tweezers to align in place. These tweezers are basic tweezers for everyday soldering jobs. However, note that these are not anti-magnetic tweezers.
Sp..
Rs21.00
Brand: VEEROBOTModel: MCH-CHS-RBCH-1362
Do you want to explore the field of robotics and autonomous robot experimentation, but don't know where to start? 2-wheeled chassis is created just for you. This imported 2-wheeled chassis is a platform for learning robotics, microcontroller programming, electronics and sensor integration. The kit c..
Rs419.00
Brand: VEEROBOTModel: CMP-ANR-UANT-635
This is a 2.4GHz 5DBI Omnidirectional Universal Booster Antenna with coverage range between 980 to 1148 feet. The Antenna is an omni-directional type with Operating frequency between 2400MHz-2500MHz. This antenna has SMA threaded bore Interface and antenna can be bent upto 90 degrees.
Specificati..
Rs229.00
Brand: VEEROBOTModel: CMP-CAW-CABL-324
USB On-The-Go (OTG) is a standardized specification that allows a device to read data from a USB device without requiring a PC. The device basically becomes a USB host and you will need an OTG cable like this to communicate between two devices.
Specifications
USB On-The-Go Cable (Micro USB)
Conn..
Rs110.00
Out Of Stock
Brand: VEEROBOTModel: CMP-CAW-CABL-314
USB 2.0 to Micro USB B Cable with Data
Specifications
Micro USB charging cable
Supports high transmission speeds and charging up to 500mA
Thinner and more flexible cable
Supports both data transfer and charging
Cable Length : 3 Feet
USB 2.0 A-Male to Micro B Data and Charging Cable
Shipping ..
Rs129.00
Brand: VEEROBOTModel: CMP-CAW-CABL-315
USB 2.0 is widely used in connecting devices such as digital cameras, external hard drives, printers and more, this USB 2.0 A-Male to Mini-B cable helps you maximise the performance of your peripherals. For devices with an older USB version, this cable is backward-compatible, so you can still make t..
Rs59.00
-16 %
Brand: VEEROBOTModel: CMP-CAW-CABL-326
These USB cables are generally used in printers. If you have an arduino uno, arduino mega board, then this is the cable you need. The B side connects to your arduino board while the A port is connected to a PC. Cable color and shape may vary slightly.
Specifications
USB Type: Type-A to Type..
Rs41.00 Rs49.00
New-31 %
Brand: VEEROBOTModel: CMP-CAW-CABL-327
This is a mini Cable For Arduino UNO/MEGA (USB A to B) with length upto a feet. Connect your Arduino Uno, Arduino Mega 2560 or compatible arduino boards, or any board with the USB female A port of your computer. Length is approximately 52 cm
USB cable is a standard USB 2.0 A to B cable which is ge..
Rs34.00 Rs49.00
-19 %
Brand: VEEROBOTModel: MOD-ACT-MTRC-54
One of the first tasks in the world of robotics is to make something move. Later realizing that it is not an easy task is something that happens. There is a brain for your robot in the form of a microcontroller and there are motors and wheels ready to take commands. But you cannot connect the tiny s..
Rs145.00 Rs180.00
New
Brand: VEEROBOTModel: CMP-ELC-LEDS-271
VEMD2023X01 - Silicon PIN Photodiode 750-1050nm 35 deg..
Rs115.00
Brand: VEEROBOTModel: CMP-SNR-PRSN-256
This Weighing Load Cell Sensor (YZC-131) With Wires is also known as strain gauge can translate up to 5 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain or pressure or force appl..
Rs249.00
Brand: VEEROBOTModel: TLS-HNT-HDTL-143
This is a simple manual wire stripper with a pair of opposing blades much like scissors or wire cutters. The addition of a center notch makes it easier to cut the insulation without cutting the wire.
Note : The color of the tool insulation may vary between blue or red. We send you the variant depen..
Rs64.00